Hang curtains high and wide
The biggest curtain mistake is mounting the rod right on top of the window frame. Designers do the opposite:
- High: mount the rod at least 4–6 inches above the frame — ideally about two-thirds of the way up to the ceiling, or just below crown molding. It makes the ceiling feel higher.
- Wide: extend the rod 8–12 inches past each side of the frame so open curtains stack beside the glass, not over it. The window looks bigger and lets in more light.
How to choose curtain length
Measure from the rod (or the bottom of the rings) to where you want the curtain to end, then choose the nearest standard length.
| Standard length | Typical use |
|---|---|
| 63 in (160 cm) | Sill or apron length on standard windows |
| 84 in (213 cm) | Floor length with the rod just above the window — 8 ft ceilings |
| 95–96 in (241–244 cm) | The most versatile: floor length with the rod mounted high on 8–9 ft ceilings |
| 108 in (274 cm) | 9–10 ft ceilings, or puddled curtains on 8–9 ft ceilings |
| 120 in (305 cm) | 10 ft+ ceilings and tall windows |
If you're between sizes, buy the longer length and hem it — or adjust the rod height so a standard length lands right at the floor.
How wide should curtains be?
Curtains should be 1.5 to 2.5 times the width of the rod so they look full when closed. 2× is the standard. For a 72-inch rod at 2× fullness you need 144 inches of fabric — three 50-inch panels, rounded up to four for a pair.
Rod length
Rod length = window width + 16–24 inches (8–12 in per side). Adjustable rods are sold in ranges such as 28–48, 48–84, 66–120 and 120–170 inches; pick one whose range comfortably includes your target length. Rods over about 72 inches need a center support bracket.